ELEGOO Mars 5 3D printer The ELEGOO Mars 5 is a 3D printer that combines advanced technology and ease of use, making it perfect for beginners and experienced users alike. Whether you are working on a prototype, a detailed figure model or a complex technical project, the Mars 5 will allow you to enjoy reliability and quality that translate into impressive results. Automatic levelling Say goodbye to time-consuming calibration and complicated settings. With the Mars 5’s auto levelling feature, the printer prepares the work surface for you with just one click. No unnecessary steps – just turn on the unit and start printing. Mars 5’s simplicity allows you to get straight down to business, regardless of your level of experience. Intelligent sensors for your peace of mind The Mars 5’s intelligent mechanical sensor ensures that the device is fully protected and the printing process runs smoothly. This sensor detects resin residue to prevent damage to the LCD screen, and continuously monitors the material level and alignment status of the work surface. Alarms for resin shortages or alignment errors minimise the risk of interruptions and waste, ensuring a smooth printing process and high quality for every print. Certainty before every print Don’t want to waste material on misprinted models? The Mars 5 has a One-Click Self-Check feature that allows the printer to check its components and preparation before each print. With just one click, the printer makes sure everything is working optimally. This ensures that every print is successful and you don’t waste time or material on unexpected glitches. Stunning detail The Mars 5 printer is equipped with a 6.6-inch LCD screen with 4K resolution, allowing you to capture the finest details with impressive precision. With an XY resolution of 35 μm and an advanced COB light source, your models will gain unparalleled depth and texture that captures every detail of your design. Ideal for creating realistic models, jewellery, architectural details and anywhere else where perfection counts. Advanced overheat protection Mars 5 takes care of your comfort and safety with advanced overheat protection. When the LED temperature exceeds 80℃, the system will automatically stop operation and issue a warning. This protects the printer’s components, ensuring long life and consistent performance, and you can print without worrying about the stability of the unit’s operation. Included Mars 5 3D printer Workplate Resin reservoir USB drive Protective mask Gloves Funnel Spare screws User manual Power supply Tool kit Scraper Manufacturer: ELEGOO Model: Mars 5 Printing technology: MSLA Working volume: 143.43 x 89.6 x 150 mm³ Print speed: Up to 70 mm/h Layer thickness: 0.01-0.2 mm XY resolution: 35 x 35 μm (4098 x 2560 pixels) Z-axis accuracy: 0.02 mm Light source: COB (wavelength 405 nm) LCD screen size: 6.6 inches, 4K Mono LCD LCD screen protection: Scratch-resistant PET film Connection method: USB interface System: EL3D-3.0.1 Compatible software: Chitubox, Voxeldance Tango Interface languages: Chinese, English Additional features: Automatic levelling, One-Click Self-Check, overheating protection, intelligent mechanical sensor (resin level alarm, residue detection alarm, levelling error alarm) Compatible resins: Most on the market (standard, waterproof, ABS, vegetable) Power requirements: 100-240V 50/60Hz 24V 3A Cooling system: 3 heat pipes fan Dimensions: 230 x 230 x 433.5 mm Net weight: 6.6 kg Gross weight: 8.6 kg
