2-in-1 xTool M1 10W laser engraving machine xTool SafetyPro™ AP2 smoke extractor

2-in-1 xTool M1 10W Laser Engraver xTool SafetyPro™ AP2 Smoke Absorber The xTool M1 10W and xTool SafetyPro™ AP2 kit is the ideal solution for creatives who value precision, safety and comfort. The xTool M1 combines the functions of an engraver, laser and blade, offering exceptional cutting and engraving accuracy thanks to its 10W power and beam focusing technology. A built-in AI camera makes it easy to position your project, and intuitive software compatible with various systems ensures convenient operation. The xTool SafetyPro™ AP2 smoke canister keeps the air clean with three-stage filtration, eliminating harmful particles and odours. Quiet operation, easy filter changes and the mobility of the unit make the kit ideal for any workshop. Versatility and precision in one unit The xTool M1 is a 2-in-1 laser engraver that combines cutting, engraving and blade work functions to open up unlimited creative possibilities. The 10W laser power allows you to cut Basswood up to 8mm thick in a single pass, while the advanced beam focusing technology ensures remarkable precision of 0.01mm. Thanks to its quiet operation (less than 60 dB), the unit is ideal for both the home workshop and professional studio. Intelligent AI camera – precision without compromise The built-in 16-megapixel ultra-wide-angle camera, supported by artificial intelligence, facilitates material positioning, automatic focusing and precise project alignment. The image recognition function allows the selected design to be automatically transferred to the material without manual calibration, saving time and eliminating the risk of errors. Intuitive software and universal compatibility Thanks to its compatibility with Windows, macOS, Android and iOS, xTool M1 ensures smooth operation on a variety of devices. The dedicated Laserbox app allows photo editing, text engraving and even the creation of QR codes for fully personalised designs. The intuitive interface makes the device user-friendly for beginners and advanced users alike. Clean air and safe working The xTool SafetyPro™ AP2 Smoke Absorber is an indispensable piece of kit that takes care of the air quality when working with the laser. The advanced filtration system consists of three layers: the pre-filter traps larger particles, the middle filter eliminates 99.97% of microscopic contaminants as small as 0.03 μm, and the main filter effectively absorbs harmful gases and unpleasant odours. This ensures that the air in the room remains fresh and you can concentrate on your work without worrying about your health. Quiet operation and easy handling The xTool SafetyPro™ AP2 operates extremely quietly, not exceeding noise levels that could interfere with your concentration. The sealed design prevents contaminants from escaping and filter replacement is quick and hassle-free – simply remove the lid, replace the filter and continue working. The compact size and mobility of the unit allows it to be easily carried and positioned where you need it most. Included M1 10W laser engraving machine Basic material package Cutting mat with light holder (blue) x2 Cutting mat with strong handle (pink) x2 45° interchangeable blade x5 Smoke absorber AP2 Filter set Pipe clamp x3 Smoke exhaust pipe Screw set Supply cable Pipe connector x2 Wall connector Screwdrivers (Phillips and flathead) x2 Operating instructions Engraver Manufacturer xTool Model M1 10W Laser output power 10W Electrical power input 38W Laser source Diode laser (Wavelength: 455nm) Lifetime 8000h ~ 10000h Maximum cutting depth 10W 8mm (Basswood) Maximum engraving speed 250mm/sec Engraving precision 0.01mm Noise level <60db Laser working area 385 x 300mm Working area for the blade 365 x 300mm Maximum working material height 16mm (without lifting) Focusing mode AI visual AF / Material recognition AF / Material setting AF Camera High-resolution, ultra-wide-angle Pixel count 16MP Image resolution 500Dpi Connection interfaces Wi-Fi, USB Operating system Windows / macOS / Android / iOS Control software Laserbox Software / Laserbox App Format types SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc. Size 557 x 453 x 230 mm Weight 9.8kg Smoke absorber Manufacturer xTool Model P5010391 Adapted machine P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 Product size 290*491*542mm Product weight 20.7 kg Control mode Touch button, four adjustable gears Pre-filtration system Cyclone separation Rated power 220W Filter layers SuperCyclone filter, pre-filter, medium performance filter, activated carbon layer, extra dense carbon mesh, high performance filter Noise 55dB