AnyCubic Wash & Cure 3 UV lamp and washing machine

AnyCubic Wash & Cure 3 print cleaning and drying device Ensure your 3D prints are properly finished and cured. The AnyCubic Wash & Cure 3 washing and drying device features an enlarged design that makes it ideal for models of different sizes. It allows cleaning both in the basket and with the platform. At the same time, it works surprisingly quietly and offers several operating modes to choose from. You can also manually adjust the cleaning and curing times. Even larger prints can be accommodated The machine’s basket capacity is 3 litres and the total capacity of its cleaning module is up to 4 litres. This means you can easily clean prints up to 165 x 100 x 180 mm (in the basket) or 165 x 100 x 165 mm (with platform). The dimensions of the curing space, on the other hand, are 160 x 180 mm. Ideal for curing The device is distinguished by its carefully thought-out design and optimised diode positioning to ensure comprehensive, even curing of models. The kit also includes an additional UV lamp with a curved design, which stands out with an energy level of 30,000 μW/cm2 and a radiation range of 1 cm to 3 cm. You can use it to successfully cure, for example, selected print details. Improved design, increased efficiency The cage of the device is made of rust-resistant, double-layered PP plastic and, thanks to the improved design, allows the prints placed on the platform to be cleaned. It also allows you to choose between 2 heights – 100 mm and 165 mm. So you can adapt it to the size of your model to optimise IPA consumption. Convenient operation The unit allows you to choose from 3 modes of operation such as washing, curing and enhanced FlexiCure curing using the included UV lamp. It is also possible to adjust the cleaning and drying time from 1 minute to 30 minutes. The Wash & Cure 3 is operated using a convenient to use dial and touch buttons. Low noise level Don’t be afraid of annoying noise. The Wash & Cure 3 model features a sealed design and optimised software, so it can deliver exceptional performance while keeping the volume low – just around 65 dB. Relax or get on with your work while the machine washes and cures your prints – nothing will disturb you. Included Print cleaning and drying unit Cleaning unit Cleaning basket Cleaning bar x4 Curing table UV lamp with bendable design Allen spanner set Power supply Instruction manual Manufacturer AnyCubic Model WS3A0WH-Y-O UV light source 10 405 nm LEDs adjustable lamp Modes of operation Cleaning, curing, FlexiCure Rated power 36 W Input voltage 100-240 V 50/60 Hz Cleaning / curing time adjustment 1-30 min. Max. dimensions of model to be cured ø160 x 180 mm Max. dimensions of model to be cleaned With platform: 165 x 100 x 165 mm; Without platform: 165 x 100 x 180 mm; Control panel Touch buttons, dial Material (cleaning basket, cleaning module, curing table) PP UV lamp height 285 mm Dimensions 216 x 217 x 310 mm Weight 2.7 kg