Phrozen Wash: Cleaner V2 Cleaning solution for 3D prints

Phrozen Wash: Cleaner V2 Phrozen Wash V2 Resin Cleaner is a specialised cleaning solution designed to effectively remove uncured resin from 3D printed models. Its low odour and pH neutral properties make it a user-friendly choice for post-processing in resin 3D printing. Key features Effective cleaning: dissolves uncured resin on build plates and printed models for thorough post-processing. Low odour: Emits minimal odour during use, improving user comfort. pH neutral: With a pH value of 7.0, it is gentle on both users and equipment. Versatile application: Suitable for use with ultrasonic cleaners and wash and cure stations, supporting various post-processing configurations. Safer alternative: Provides a safer and more efficient option compared to traditional alcohol-based cleaners such as IPA or ethanol. Advantages Effective cleaning: Effectively dissolves uncured resin, ensuring thorough cleaning of printed models. Low odour: Emits minimal odour, increasing user comfort during the cleaning process. Non-flammable: Safer to use compared to traditional solvents such as IPA, reducing the risk of fire. Environmentally friendly disposal: After use, the solution can be cured in the sun to solidify any remaining resin before disposal, minimising environmental impact. Versatile application: Suitable for use with various cleaning methods, including spraying, soaking and ultrasonic cleaners. Instructions for use Application methods: Can be applied directly to the model or soaked in the solution. Compatibility: Suitable for use in ultrasonic cleaners and cleaning and curing stations. Disposal: After use, cure the waste solution in the sun to harden any remaining resin before disposal. Precautions Store at room temperature in a dark, ventilated place. Shake well before use. Keep out of reach of children and avoid direct exposure to sunlight. Wear protective gloves and masks when using. In case of contact with skin or eyes, rinse thoroughly with water. Phrozen Wash V2 Resin Cleaner is a user-friendly and efficient cleaner for 3D printed models, streamlining the post-processing process for both enthusiasts and professionals of resin 3D printing.