Resin for AnyCubic 3D printer Water-soluble White 1kg

AnyCubic Water-Wash Resin (White) AnyCubic Water-Wash Resin is a state-of-the-art resin that features high precision and minimal shrinkage during curing, allowing even the most complex models to retain detail. Its unique formulation provides strength and flexibility, making models resistant to cracking and mechanical damage. In addition, prints can be stored for 3 years in natural conditions without the risk of cracking. Low cost and high efficiency AnyCubic Water-Wash Resin allows cleaning in 3 ways, eliminating the need for alcohol and IPA. This reduces cleaning costs and increases cleaning efficiency. You can clean models by ultrasonic, with a dedicated machine such as Wash & Cure from AnyCubic or simply with water, allowing you to tailor the process to your capabilities and needs. Safe and comfortable to use The product has low odour emissions, making it pleasant to use. Suitable for those looking for materials with less environmental impact and safe for everyday use. Faster printing Thanks to its lower viscosity, AnyCubic Water-Wash Resin offers faster printing and reduced exposure time, resulting in higher productivity. It is also compatible with a wide range of UV wavelengths (365-405nm), making it a universal choice for most 3D printers on the market. 2.2 Elements of labelling UFI 0CYT-E5V6-M00R-3TPN Labelling according to Regulation (EC) No 1272/2008 [CLP]. Hazard pictograms (CLP) GHS05 GHS07 Signal word Danger Contains Ethanediol 1,2-Biscarylate;Oxirane, 2-methyl, oxirane polymer, bis(2-methyl-2-propionate), block;2,2′-(ethylenedioxy)diethyl diacrylate; Triethylene glycol diacrylate; 3-[2,2-dimethyl-1-oxo-3(1-oxaolyloxy)propoxy]-2,2-diethylpropyl acrylate; Ethyl (2,4,6-trimethylbenzoyl) phosphinate Hazard statements (CLP) H315 – Causes skin irritation. H317 – May cause an allergic skin reaction. H318 – Causes serious eye damage. H335 – May cause respiratory irritation. H412 – Harmful to aquatic life with long lasting effects. Precautionary statements (CLP) P101 – If medical advice is needed, show the container or label. P102 – Keep out of the reach of children. P261 – Avoid breathing vapours. P271 – Use only outdoors or in a well-ventilated area. P280 – Wear protective gloves, protective clothing, eye protection and face protection. P305 P351 P338 P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easily removable. Continue rinsing. Contact a POISON CENTRE or doctor immediately. P405 – Keep locked up. P501 – Dispose of contents and container to an approved waste disposal facility. Child-resistant safety device Not applicable. Touch guard Not applicable. Download: Safety Data Sheet Physical and Chemical Properties: UV wavelength: 365-405 nm Density: 1.15-1.20 g/cm³ Viscosity: 150-250 mPa-s at 25°C Hardness: 80 Shore D Tensile strength: 30-45 MPa Elongation at fracture: 8%-15% Elasticity at tension 1600-1800 MPa Flexural strength: 50-60 MPa Modulus of elasticity at bending: 1500-1600 MPa Exposure time for bottom layer: 20-70s Standard exposure time: 1.5-10s Colour White Recommended printing parameters for different printer models: Layer thickness: 0.05 mm Exposure time: 1.5s to 8s No-exposure time: 5,5-2,5s Exposure time of lower layers: 20s to 35s Number of lower layers: 2-6 Anti-aliasing: 1/16 Z Lift distance: 4mm to 10mm Z Lift speed: 2mm/s to 6mm/s Z Retract Speed: 2mm/s to 6mm/s